Jeep Cherokee Lower Control Arms

Install the Jeep Cherokee Lower Control Arms otherwise known as the LCA.

It is a very simple job. You basically remove the old ones and install the new ones.

Here is a picture of the Lower Control Arm before the new one is installed.

This is a tough bolt that you will need to remove. I would suggest spraying this with PB Blaster before you try so it comes out without breaking.

This is the next bolt to remove and now you can pull out the control arm. You will need to hold the nut on the other side to remove this bolt.


Make sure that the side with the zerk is mounted to the axle and that the zerk is on top and pointed diagonally out so you can grease it.

Here is what it looks like after you have installed the lower control arm.

Previous page: Jeep XJ Lift  Next page: Jeep Cherokee RE1600 Trackbar